Medical infrared thermography is an imaging device that records the thermal field of the human body, which can check for inflammation, muscle pain and circulatory disorders that cannot be detected by MRI, CT and other devices, and help doctors to obtain objective examination information on painful areas that cannot be observed by the naked eye. The medical infrared camera records the temperature of the patient’s body surface in real time, calibrates it to different colours and displays it visually on the screen, enabling the doctor to observe that the temperature change of the affected part is different from that of the healthy part, and based on the temperature difference and asymmetry, it provides a basis for the doctor to analyse the causative factors, determine the scope of the treatment, and observe the effect of the treatment.Tortai has rich experience in the design and manufacture of medical infrared camera PCB boards. Tortai Electronics has rich experience in medical infrared camera PCB design and manufacturing, and has long been providing one-stop manufacturing solutions for small and medium-sized customers in the United States, the United Kingdom, Canada, France, Germany, Austria, Italy, Australia and other small and medium-sized customers.
Technical Parameters of Medical Thermal Imaging Camera PCBA Assembly Boards
Factory standard lens: 7.5mm
Field of view: 29.8° X 22.6
Minimum focusing distance: 0.2m
Spatial resolution IFOV: 3.33 mrad
Thermal sensitivity NETD (at 30°C): ≤0.08°C / 80mK
Image frame rate: 50HZ
Focus mode: Manual
Digital zoom and rotation: 1-20x continuous zoom in 0.1 steps; 0-360° rotation in 1° steps
Sensor type: uncooled focal plane detector (UFPA)
Working wavelength: 8-14um
Resolution: 160×120
Display: 3.5 “HD colour TFT touch screen
Image display mode: infrared, visible light image, picture-in-picture fusion
Image adjustment: manual / automatic / histogram
Low range: -20°C ~150°C (-4°F ~302°F), -4°F ~302°F (-4°F ~302°F)
High range: 0°C ~400°C (+32°F ~752°F)
Accuracy: ±2°C (±3.6°F) or ±2% of measured temperature, whichever is greater
Automatic marking of the highest and lowest temperatures in the area; colour and sound alarms
Isothermal analysis: detection of high and low temperatures, temperature intervals
Measurement corrections: emissivity, ambient temperature, reflected temperature, distance, relative humidity, temperature compensation
Laser/illuminator: less than class2/white LEDs
Storage: 4GB card as standard, supports up to 32GB
Tortai Electronics serves more than 16 customers from all regions of the world, and has received nothing but praise from them. We not only ensure their full range of quality services, but also provide customers with DFM manufacturability design solutions, which can reduce product quality problems and lower costs, but also reduce the cost of product after-sales service. At the same time, Tortai Electronics has a well-established after-sales and logistics team, so that the products can be followed up with higher quality services.