Tortai Electronics has been deeply engaged in the medical electronics industry for many years, and is equipped with a professional R & D team, engineering team, and have 18+ years of experience. From concept to product, we provide you with one-stop electronic manufacturing services. Its research and development team can provide the following services:
Develop customized PCBA board solutions on demand:
1、Project evaluation and program development
2、Hardware design and software design
3、Old product upgrade, old product optimization
4、product certification technical support
5、Accurately avoid problems and risks that may affect the project before the project landing.
Tortai has customized a set of multi-functional, multi-purpose professional ultrasonic electrical stimulation combined therapy instrument for a well-known medical company, the design covers independent two-channel electrical stimulation output, can support a single ultrasound treatment mode, a single electrical stimulation treatment mode or a combination mode, suitable for different patients or different sites. As one of the common means of physical therapy, ultrasound therapy has the characteristics of precise curative effect and convenient operation.
一、Main curative effects:
Can improve chronic pelvic inflammatory disease, can maintain the uterus and ovaries, can also soften scars, can warm the uterus, regulate the internal environment of the pelvic cavity, can ensure adequate blood supply to the uterus and ovaries, improve dysmenorrhea and other conditions. It can also stimulate the deeper nervous system through a specific low or medium frequency current acting on the human body through the skin electrode, to relieve pain, promote muscle contraction, increase blood circulation and so on. This program can stimulate the deeper nervous system, adjust the vacuum density of the electrode and the frequency of electrical stimulation, so that patients have a more comfortable feeling, the effect is more. It can be widely used in rehabilitation and health care in hospitals, clinics and community health centers.
二、Technical parameters: (Can be customized according to your actual needs)
Ultrasonic
1、Ultrasound treatment channel: double channel, each channel can work independently, of which 1 channel supports high-power mobile treatment application, the other channel supports fixed application, 2 channels can choose fixed treatment application, 2 channels support the combination of ultrasound and electrical stimulation application.
2、Beam type: collimation type
3、Output power :0.5W~10.0W 20%, when the duty ratio of 80%; 0.5W~15.0W 20%, when duty cycle ≤70%.
4、Effective radiation area :3.5cm2 20%(treatment head area 5cm); The optional treatment head area is 1cm2.
5、Sound operating frequency :1MHz and 3MHz optional, the error is not more than 10%.
6、Duty cycle 10%-100% adjustable, step length 10%/ step.
7、Fixed treatment application effective sound power: less than 3W/cm2.
8、Beam maximum loud strength :24W/cm2.
9、Waveform: continuous wave, pulse wave optional, pulse repetition frequency 100Hz adjustable.
10、Waterproof rating of treatment head :IPX7.
11、The treatment time is adjustable from 1-30 minutes, allowing 10% deviation.
12、Can hold mobile working mode treatment head or fixed working mode treatment head, superelectric combined application, ultrasound treatment head can be used as electrical stimulation treatment electrode.
Electrical stimulation
1、Dual channel electrical stimulation output, with 4 electrode interference wave, 2 electrode interference wave, TENS, EMS, Russian waveform multiple modes; Each channel electrical stimulation mode can be independently controlled;
2、Each channel can support the application mode of “1 loop electrode +9 treatment electrodes”, which can be sequential stimulation treatment for 9 sites;
3、Stimulation current strength :0-100mA(500Q impedance) adjustable;
4、Electrical stimulation pulse width :30-2500us adjustable, rise/fall time :0s~5s adjustable;
5、Electrical stimulation pulse frequency :1-2500Hz adjustable, step 1Hz adjustable;
6、Pulse group frequency :1-10Hz, step 1Hz adjustable;
7、Carrier frequency :2.5kHz, 4kHz;
8、Treatment time :1min~60min adjustable;
9、All treatment, support continuous work and intermittent work, continuous and intermittent work time can be adjusted
Ultrasonic diagnostic instrument ODM case sharing
三、Software parameters
1、Ultrasound therapy and electrical stimulation therapy can be treated alone, combined, combined (the same channel, the use of ultrasonic guide and electrical stimulation combination treatment), sequential treatment (1+N mode of electrical stimulation sequential treatment), you can choose different treatment methods, develop treatment plans.
2、Ultrasonic treatment parameters can be adjusted by combining three modes: working frequency, duty cycle and ultrasonic power.
3、Electrical stimulation treatment parameters can be customized, the basic pulse width (positive half-cycle and negative half-cycle waveform width can be adjusted, positive half-cycle and negative half-cycle waveform interval can be adjusted), frequency, rise time, fall time, pulse group frequency and other parameters can be set, can realize the application of frequency conversion mode.
4、The single-channel electrical stimulation electrode adopts the mode of “1 loop electrode +9 treatment electrodes”, which can control each treatment electrode in different regions to achieve sequential treatment in different regions.
5、The system board supports the wire controller interface, which allows the patient to adjust the two channel parameters according to the treatment response (electrical stimulation intensity, ultrasonic treatment intensity, treatment type and emergency stop function).
6、The superelectric module communicates with the system board module through 232 serial port.
7、The system board supports: power management (battery charge and discharge, power distribution), wire control interface, 2 ultrasonic treatment channel interface (can be used as the negative electrode of electrical stimulation), 2 electrical stimulation channels, 1 special electrical stimulation channel (1 loop electrode +9 treatment electrodes), 1 wire controller channel (through the serial port can set the control mode, control emergency stop), power adapter input connection Mouth; Support key control interface.
四、Symptoms
1、Analgesic and anti-inflammatory (neuralgia, arthralgia, shoulder periarthritis, tennis elbow, thrombophlebitis, etc.)
2、Relieve muscle spasm and soft tissue contracture
3、Promote wound healing/promote blood circulation/promote tissue regeneration
4、Soften the scar
5、Release adhesion
6、Treat and prevent muscle atrophy
7、Soft tissue injury, lumbar muscle strain
8、Joint diseases (cervical spondylosis, shoulder periarthritis, lumbar disc herniation, etc.)
9、Promote blood circulation